What are the steps of using brick wallpaper?

The brick wallpaper is just pasted on the wall, it looks like a piece of bricks. To put it bluntly, it is a tile with a surface texture that mimics the delicate texture of wallpaper.

1. How to buy brick wallpaper?

2. How to use brick wallpaper?

3. There are some problems with the use of brick wallpaper, how should we deal with them?

How to buy brick wallpaper?

1. Buy brick wallpaper tiles by looking at:

① Look at the pattern and texture of brick wallpapers: The texture of brick wallpaper is natural and lifelike, with great randomness and almost no repetition.

② Look at the back of the imitation wallpaper tile: It mainly depends on whether the color of the back is pure. The pure color of the back of the imitation wallpaper tile is generally milky white. There will be anti-counterfeiting patterns on the back of each piece of brick wallpaper.

③ Look at the side of the imitation wallpaper tile: Observe from the side whether the particles of the imitation wallpaper tile are fine and uniform. The large and rough particles indicate that the brick has a loose density, a dense structure, and its hardness and abrasion resistance are high.

④ Look at the surface of brick wallpaper: It mainly depends on whether the texture of the surface is clear, whether the light feel is soft, and whether the color is crystal clear.

2. Stand up the brick wallpaper and hit the bricks with your hands. The clearer the sound proves that the density of the bricks is higher and the quality is better. On the contrary, the dull sound proves that the density of the tiles is worse.

How to use brick wallpaper?

1. Wallpaper is fragile, so you should be extra careful when constructing it.

2. Cut the nails dry before construction to avoid scratches on the wallpaper.

3. Keep the brick wallpaper flat and clean before construction.

4. The surface cannot be cleaned with water. If stains are found, use a sponge to absorb water and unscrew a part of the water to maintain a certain humidity. Then wipe gently with a damp cloth.

5. Brick wallpapershould never be soaked in water.

6. Be careful not to let any glue stick to the surface of the brick wallpaper, otherwise, the brick wallpaper will change color or fall off.

There are some problems with the use of brick wallpaper, how should we deal with them?

Blistering

Wallpaper blistering is a common problem. The main reason is that the uneven glue application when pasting the wallpaper causes the surface of the wallpaper to shrink and separate too much moisture from the base layer, resulting in some built-in bubbles. The solution is very simple. Just take a general sewing needle to pierce the bubbles on the surface of the wallpaper to release the gas, and then use the needle tube to draw an appropriate amount of adhesive into the pinhole just now, and finally re-flatten the wallpaper and dry it.

Get moldy

Moldy brick wallpaper generally occurs in the rainy season and humid weather, mainly because the wall moisture is too high. The solution to the wallpaper where the mildew is not too serious is as follows: use a white towel with a proper amount of water to wipe, otherwise wipe with soapy water. The best way is to go to the wallpaper store to buy a special mildewcide.

The warped edge of the brick wallpaper may be caused by the unclean treatment of the base layer, the low adhesive strength of the adhesive or the edge of the wall covering the external angle is less than 2mm, etc. The solution: use wallpaper glue powder.

As a kind of wallpaper, brick wallpaper meets the needs of customers for different decoration scenes and makes the entire indoor space more natural. Therefore, brick wallpaper has been widely welcomed. Shandong Max Decorative Material Co., Ltd. is committed to the design and promotion of wallpapers and can provide tens of thousands of wallpapers with different themes for you to choose from.